42V Charger for Meepo, Turboant X7 Electric Scooters

To ensure your batteries last 10 times longer, it is recommended to avoid using them when the charge level drops below 35% and not to charge them above 85-90%.

The charger you have provided has the following specifications:

Input: AC 100-240V, 50/60 Hz Charging Voltage: 42V Charging Current: 2A Charging Mode: CC-CV (Constant Current-Constant Voltage) Charge Indicator: Red LED - Charging, Green LED - Charge Complete Charger Port: DC 5.5 x 2.1 mm Product Size: 132 x 57 x 32 mm Cable Length: 39.4 inches / 100 cm Security Protections: Over-voltage, Over-current, Over-load, Short-circuit

The package includes a 42V, 2A battery charger and a US plug cable.

To ensure proper use and maintenance of the charger, please follow these guidelines:

1. When charging, first connect the charger to the battery, then connect it to the AC power source. After the battery is fully charged, disconnect the AC power first, then disconnect the battery. If you pull the battery plug first while charging, especially when the charging current is high (indicated by the red light), it can easily damage the charger.

2. When the LED light turns green, continue charging for an additional 2-3 hours.

3. Avoid completely draining the battery before charging. This can help protect the battery and prevent damage.

4. Perform a deep discharge (riding the controller until the battery undervoltage protection activates) every 3 months. This helps activate the long-term inactive materials in the battery.

5. If the battery has not been used for a long time (2-3 months), charge it before use to ensure it is not damaged.

6. Use the charger in a dry environment.

7. When not in use, do not leave the charger continuously connected to the power supply.

Tangspower is committed to providing high-quality products for end-users. If you are not satisfied with the product, please let us know, and we will offer a full refund or replacement.

The charger's technical specifications include: - AC input voltage: 100-240V, 50/60 Hz - Output: 42V, 2.0A - 105°C output capacitor, globally applicable AC input voltage - 100% full load aging test, internal EMI filter, minimum ripple - Precision current within ±0.1A, voltage tolerance of ±0.1V, no virtual marking - Built-in cooling fan, with heat-dissipating fins surrounding the board, dissipating heat through the shell - Protections: Short circuit, over-current, over-voltage

The charger is compatible with Meepo V3 battery chargers, Voyager electric scooter chargers, and other 42V, 2A charging applications.

product information: